Session Chair:
Nick Gismondi,
MPP

Improvements to the Powder Processing of Near-Final Shape Alnico Magnets
Emily Rinko,
Iowa State University

Advancements in Continuous Processing of Soft Magnetic Components
Stephen Feldbauer,
Abbott Furnace Company

Structure–Property–Processing Relationship in Heat-Treated Cu-Ni-Si Powder Metal Premixed with Aluminum and Alumina Additives
Austin Fairman,
The Pennsylvania State University—DuBois

Session Chair:
Wiley Abner,
MPP

High Performance Lubricant for High Density Applications and Warm-Die Compaction
Vincent Paris,
Rio Tinto Metal Powders

Comparative Evaluations of PM Characteristics of Commercial PM Lubricants in an Iron-Based Mixture Using Advanced Characterization Methods
Amir Shirani,
H. L. Blachford Ltd.

Warm-Die Compaction of Low-Alloy Steel Powder Mix: Compaction Mechanics and Densification
Ilaria Cristofolini,
University of Trento

PM Applications II
Session Chair:
Matthew Bulger,
ATPM Consulting

Impact of Powder Metallurgy in Hybrid and Electrical Vehicles
Dakota C. Stormer,
The Pennsylvania State University-DuBois

Effectiveness of Silver Coated Copper Powder as an Interlayer for Diffusion Bonding of Silver-Graphite on Copper
Nathan S. Banner,
The Pennsylvania State University-DuBois

Bulk High Strength Ultrafine-Grained Silver Alloys Via Powder Metallurgical Approaches
Erik Sease,
University of California, Riverside

Session Chair:
John W. von Arx,
Phoenix Sintered Metals LLC

Influence of Vacuum Heat Treatments on Microstructure, Texture and Mechanical Properties of NiTa Alloy Fabricated by Laser Powder Bed Fusion for Sputtering Target Application
Cheng-Tse Wu,
University of Toronto

Reverse Effect of Hot Isostatic Process for High Laser Input Energy During Selective Laser Melting Process on Ti-6Al-4V Alloy
Eunhyeok Seo,
UNIST: Ulsan National Institute of Science and Technology
 

An Overview of Metal Additive Manufacturing for Aerospace & Space Applications
Deepak Madan,
Danik Innovations LLC

Session Chair:
Lou Koehler,
Koehler Associates

Effect of Atomization Method and Post-Processing Treatments on the Microstructure and Mechanical Properties of Ti-6Al-4V Alloys Manufactured via Laser Powder Bed Fusion
Leandro Feitosa,
Sandvik Machining Solutions AB

Effect of Powder Reuse on the Mechanical Properties of Selective Laser Melted Metals
Fernando Alamos,
University of Notre Dame

Development of Spheroidization Process for Electrolytic Dendritic Iron Powders
Jay Runwal,
RWTH - Rheinisch-Westfälische Technische Hochschule Aachen University

Session Chair:
Ameila Elliott,
Oak Ridge National Laboratory

Toward Same Day AM Parts Production 
Dan Gelbart,
Rapidia

Processing of Tungsten Heavy Alloy by Extrusion-Based Additive Manufacturing
Animesh Bose, FAPMI,
Desktop Metal

Effect of Porosity and Composition on Mechanical and Biological Properties of Additively Manufactured Novel Titanium Based Alloys
Sushant Ciliveri,
Washington State University, Pullman

Session Chair:
Ravi K. Enneti,
Global Tungsten & Powders Corporation

An Investigation into the Factors Influencing the Microstructural Homogeneity of Sintered Hardmetals
Thomas Jewett,
Global Tungsten & Powders Corporation

Cavitation Erosion Characterization of Cemented Carbides
Núria Cinca,
Hyperion Materials and Technologies

Reinforced Concrete Drilling with Cemented Tungsten Carbide Drill Bits: Wear and Fracture Mechanisms and Predictive Failure Analysis Based on Finite Element Modeling and Weibull Statistics
Steven Moseley,
Hilti AG

Session Chair:
Mike Marucci,
Kymera International/ Reading Alloys

Fracture and Fatigue in PM Materials: A Perspective from Powder Forging to AM
Howard A. Kuhn,
University of Pittsburgh

Effect of Highly Loaded Volume on the Fully Reversed Fatigue Strength of Heat Treated Fe-Cu-C Steels
Paul Beiss, FAPMI,
RWTH Aachen University

Effect of Microstructure Heterogeneities on the Mechanical Properties of PM Steels
Carl Blais,
Laval University