Session Chairman: S.K. Tam, ORMCO
153
Finland
8:00 a.m.
High-Performance Aluminum Alloys by Additive Manufacturing Juha Kotila, EOS Finland
069
USA
8:25 a.m.
Investigation of the Selective Laser Melting Process for AlSi10Mg and AA6061 Fabricated at High Laser Power Michael V. Pires, Lehigh University
285
8:50 a.m.
The Effect of Preparation Techniques and Storage Conditions on the Flow Properties of AM Feedstocks John Yin, Freeman Technology
Session Chairman: Michael Stucky, Norwood Medical
085
Canada
Quantification of Contaminants in 3D Printing Metal Powders Using Micro-focus X-Ray Tomography Roger Pelletier, National Research Council Canada
120
Assessing Post-Processing States of AM Builds with Analysis of Ultrasonic Techniques Ajay V. Krishnan, Incodema3D, LLC
131
NDT of Metal Additively Manufactured Parts via Acoustic Resonance Testing Bryan Butsch, The Modal Shop, Inc.
Session Chairman: Hyrum Lefler, Carpenter Technology Corporation
137
Manufacturing, Remanufacturing and Reconfiguration of Aerospace Components with Direct Metal Deposition (DMD) Arshad Harooni, DM3D Technology
067
Fused-Filament Fabrication of Metal with a Markforged Metal X System Michelle Chao, Markforged
161
Germany
3D Screen Printing of Metal Powder Guido Stiebritz, H.C. Starck Hermsdorf GmbH
Session Chairman: Thomas F. Murphy, FAPMI, Hoeganaes Corporation
040
United Kingdom
10:30 a.m.
Alloys-by-Design: a Biomedical Titanium Alloy for Additive Manufacturing Enrique Alabort, OxMet Technologies
072
10:55 a.m.
Increasing Fatigue Life of Additively Manufactured CoCrMo Alloy with Affordable Heat Treatment Riku Ruohomaa, EOS Finland
098
11:20 a.m.
3D Printing of Biomimetically Inspired Zircon for Ceramic Mold Components Tejesh C. Dube, Indiana University—Purdue University Indianapolis (IUPUI)
Session Chairman: Alan Taylor, GKN Sinter Metals
112
Powder Reconditioning of AM Feedstock to Increase Processing Efficiency Timothy E. Prost, Ames Laboratory
071
Recyclability of Ti-48Al-2Nb-2Cr Powder in Additive Manufacturing Andrzej L. Wojcieszynski, ATI Specialty Materials
201
Development of Enhanced Tool Steels for Powder Bed Fusion Additive Manufacturing Martin A. Kearns, Sandvik Osprey Limited
Session Chairman: Bhaskar Dutta, DM3D Technology, LLC
095
Real-Time Process Monitoring Accelerates Process Development and Streamlines Process Control Marc Saunders, Renishaw Inc.
129
Improving Productivity in Laser Powder Bed Fusion Systems James W. Sears, Carpenter Technology Corporation
172
In-Process Monitoring for Laser Metal Deposition Melanie A. Lang, Formalloy
032
3:15 p.m.
Additive Manufacturing of a Novel Cr-Ni Alloy Using the Bound Metal Deposition (BMD) Technique Animesh Bose, FAPMI, Desktop Metal, Inc.
151
3:40 p.m.
3D Printing and Sintering of Bronze Filament Jing Zhang, Indiana University—Purdue University Indianapolis (IUPUI)
134
4:05 p.m.
Structure-Property Relationships in WC-12Co Made by Binder Jetting Additive Manufacturing Zhuqing Wang, Kennametal
Session Chairman: Deepak Madan, Luxfer Magtech
093
Powder Re-Use Strategies for Additive Manufacturing Production Lucy Grainger, Renishaw Inc.
121
Effect of Powder Reuse on Static Mechanical Properties of Stainless Steels Produced Through Selective Laser Melting Jessica Schiltz, University of Notre Dame
073
The Effect of the Number of Printer Cycles on Titanium & Steel Powders Used for AM Tony Thornton, Micromeritics Instrument Corporation
Session Chairman: Joseph Tunick Strauss,
HJI Company, Inc.
162
Robust Metal Additive Manufacturing Development and Industrialization Youping Gao, Castheon, Inc.
091
Influence of Powder Manufacturing Process on Properties of Laser-Powder Bed Fusion Processed Ti-6Al-4V Paramjot Singh, University of Louisville
046
3D Printed Steel Tooling and Dies for High-Volume Part Production Faith Oehlerking, Formetrix
Phone: (609) 452-7700
Email: info@mpif.org