Auburn University
Alireza Bidar - A Comparative Study on the Tensile Deformation Behavior of Inconel 718 Fabricated via L-PBF, LP-DED, and AW-DED: from Cryogenic to Elevated Temperatures
California State University, Los Angeles (Cal State LA)
Matthew Engquist - Scan Strategies and Texture Formation in Laser-Wire Directed Energy Deposition
Nathan Stoetzel - Numerical Modeling of Laser-Wire Directed Energy Deposition Process
Colorado School of Mines
Adam Freund - Processing of WTaFeCr Multi-Principal Element Alloys for Improved Mechanical Properties in Extreme Environments
Megan Le Corre - Implementation of Solidification Modeling Towards Tailorable Refractory Microstructures in Additive Manufacturing
Georgia Institute of Technology (Georgia Tech)
Ruoqi Gao - Control of Residual Stress and Distortion in Metal Additive Manufacturing via Inverse Mapping of Textures
Navid Nasajpour Esfahani - Automated Residual Stress Measurement for Laser Powder Bed Fusion
Iowa State University
Luke Gaydos - Investigation of Microstructural Alignment Utilizing Engineered Cooling during Additive Manufacturing of Powder-Based Alnico Magnets
North Carolina State University
Victoria Himelstein - Novel Manufacturing of Molybdenum Alloys
Penn State University
Ian Wietecha-Reiman - Role of Manganese Composition on the Strain-Controlled Fatigue Life in Additively Manufactured 316L Austenitic Stainless Steel
Penn State University - DuBois
Julie Hedlund - Investigating the Relationship Between Resonance Signature and Material Density
Purdue University
Sivasubramanian Chandramouli - Optimizing Surface Quality in Powder Bed Fusion of 316SS: Remedial Role of Shot Peening
Texas A&M University
Amrutha Dinesh - Shell Designs for Tailoring Dissolution Rates of Selective Laser Sintered Pharmaceutical Printlets
University of Louisville
Justin Gillham - Multi-Material Fabrication and Part Repair With Powder Direct Energy Deposition Additive Manufacturing
University of Michigan
Buhari Ibrahim - Enhancing Strength in Binder-Based 3D Printing of SS316L via Sub-micron Metal Material Jetting
University of Pittsburgh
Borna Rafiei - Effect of Post-Processing Heat Treatment on the Stress Corrosion Cracking Behavior of Binder Jet Printed 17-4PH Stainless Steel
University of Texas at El Paso
Diego Ariza - Microstructural Control of a Multi-Phase PH Steel Printed with Laser Powder Bed FuEffects of HIP Post-processing on the Fatigue Life Behavior Under 4-Point (Flexural) Bending of Laser Powder Bed Fusion (L-PBF) Ti-6Al-4Vsion
Luis Marquez - Comparison Analysis of Heat Treated LPBF Ti-6Al-4V and Wrought Fabricated Titanium
University of Utah
Tristan Armstrong - High Cycle Fatigue Performance of LPBF Samples Fabricated from GSD Powder
Barnali Sutradhar - Effect of Carbon on Binder Jet Printed Ti64 Alloy
Rukesh Gusain - Tensile Behavior of Additively Manufactured Haynes 230 at Different Temperatures: a Comparative Study between LP-DED and L-PBF
Amirhesam Shakibizadeh - Investigating the Potential of Laser Wire Directed Energy Deposition for Tailored Microstructures in 316L Stainless Steel Through Process Parameter Manipulation
Carnegie Mellon University
Sarah Birchall - Characterizing Flowability of Water Atomized Powders for Laser Powder Bed Fusion Additive Manufacturing
Nick Krienke - Processing of NbTiZrTaV for Enhanced Mechanical Response
Drexel University
Joseph Wright - Strength, Microstructural Effects, and Stress Concentration Sensitivity in Green Metal Powder Compacts
Wei Huang - Analytical Prediction of Texture of Multi-Phase Material in Laser Powder Bed Fusion
Indiana University-Purdue University Indianapolis
Andrew Gillespie - Improved Design of a Customized Inkjet 3D Printer
Lehigh University
Michael Pires - Hot Isostatic Pressing of Additive Manufactured 316L Stainless Steel via Metal Binder Jetting and Metal Material Jetting
Northwestern University
John Reidy - Extrusion-Based Metal Additive Manufacturing of 316L Using Highly Loaded Feedstock
Alex Davis - Effects on Microstructure of High Entropy Alloys
Hope Spuck - A Novel Approach to Printing Soft Magnetic Composites
Rice University
Wesley Combs - Characterization and Validation Experiments for a Binder Jet 3D Printing Modeling Framework
University of Castilla-La Mancha
Alvaro Garcia - Graphene Impact on the Mechanical and Functional Properties of Composite Extruded Modeling Cordierite
Suyash Niraula - A Binning Approach to Multi-Material Additive Manufacturing Through Laser Powder Bed Fusion
Marcos Kendy Miyashima Moritugui - Effects of Heating Rate on the Prior Austenite Grain Size of Free-Sintering and Low-Alloy (FSLA) Steels
Pierangeli Rodriguez De Vecchis - Densification and Microstructural Evolution of Binder Jet Printed and Sintered Porous Ni-Mn-Ga Magnetic Shape-Memory Alloys
Cristian Banuelos - Investigation of Residual Stresses in Laser Powder Bed Fusion Manufactured Ti64 Specimens after Machining Using X-ray Diffraction
Shadman Tahsin Nabil - Exploring the Effect of Different Scanning Strategies on the Microstructure in IN718 Fabrication via Electron Beam Powder Bed Fusion
Runlin Pu - A study on the Influence of Process Parameters on the Microstructure and Mechanical Properties of LPBF Manufactured Ti-6Al-4V Components
Washington State University
Michael Myers - Additively Manufactured 316L Stainless Steel with Copper Addition via Laser-Directed Energy Deposition (DED)